Freelander Service Procedures
EMISSION CONTROL
17-1-6
REPAIRS
Valve - canister purge - K1.8
$% 17.15.39
Remove
1. Disconnect battery earth lead.
2. Disconnect multiplug from purge control valve.
3. Disconnect quick release hose connector on
purge control valve.
CAUTION: Always fit plugs to open
connections to prevent contamination.
4. Release clip and disconnect purge hose from
inlet manifold.
5. Release clip and slide purge control valve off
from bracket.
Refit
1. Position purge control valve onto bracket.
2. Connect purge hose to inlet manifold and
secure with clip.
3. Connect quick release hose connector to purge
control valve.
4. Connect multiplug to purge control valve .
5. Connect battery earth lead.