Polish - difficult removal from plastic mouldings

POLISH - DIFFICULT REMOVAL FROM PLASTIC MOULDINGS

Model

Freelander

Affected vehicles

All vehicles

Date

1998-03-11

Reference

Bulletin 0009, CDS ref L8369bu

Bulletin text

Freelander

AFFECTED RANGE:

All vehicles

PROBLEM:

POLISH - DIFFICULT REMOVAL FROM PLASTIC MOULDINGS

Unsightly white polish trapped in grained surfaces of plastic mouldings, i.e. bumpers, claddings, mirrors, taildoor handle etc.

CAUSE:

Accidental polish contamination of plastic components during valeting.

ACTION:

Remove polish traces with Tefoil + PTFE, part number STC 4224. An oily residue will remain following removal which must be removed with panel cleaner to restore gloss levels.

Note: Repeated use of this treatment on the same component area may result in degradation of plastic. For this reason routine use should be avoided and care taken to avoid contamination of plastic components when valeting.

PARTS INFORMATION:

STC 4224 - Tefoil + PTFE

WARRANTY CLAIMS: Not applicable

Bulletin N o : 0009 L8369bu 1 11.03.98