Power steering box replacement
- Make
- Land Rover
- Model
- Freelander Technical Bulletins
- Section
- Power steering box replacement › Power steering box replacement
POWER STEERING BOX REPLACEMENT
- Model
- All models
- Affected vehicles
- All derivatives
- Date
- 1994-02-18
- Reference
- 18/02/94
Bulletin text
Power Steering Box Replacement
MODEL AFFECTED VEHICLES
All models All derivatives
DETAIL
A number of Product Reports have been received which detail either steering box fault reporting or steering box replacement. To enable corralation between the Product Report and the displaced unit the steering box serial number MUST be recorded on the Product Report in the major unit column.
The serial number is stamped on a metal tag which is riveted to the steering box casting below the input shaft and takes the form of an alpha numeric code (see illustration). The following example decodes the information on the tag and is required to be reproduced on the Product Report:
ACTION REQUIRED
Upon steering box replacement or fault reporting record the steering box number in the major unit section on the Product Report and submit the report to Land Rover.
PARTS INFORMATION
Not applicable
PROCEDURE
Not applicable
18/02/94
57/03/94/EN
3 A 0001 .
WARRANTY
Normal warranty policy and procedures apply.
COMP. CODE
5F4
SRO
Refer to individual SRO's for type of repair undertaken.
Parts & tools for this job For Land Rover Freelander
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Land Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.