Tyre pressure specification revised
- Make
- Land Rover
- Model
- Freelander Technical Bulletins
- Section
- Tyre pressure specification revised › Tyre pressure specification revised
TYRE PRESSURE SPECIFICATION REVISED
- Model
- Freelander
- Affected vehicles
- All derivatives
- Date
- 1999-03-03
- Reference
- Bulletin 0009, CDS ref L8512bu
Bulletin text
Freelander
AFFECTED RANGE:
All derivatives
PROBLEM:
TYRE PRESSURE SPECIFICATION REVISED
CAUSE:
A revised specification has been introduced which reduces tyre pressures for normal driving conditions. Development has shown that this will enhance tyre life and improve ride comfort.
ACTION:
At the Pre Delivery Inspection and at routine service intervals, adjust the tyre pressures to the new settings below:
Normal driving conditions (Carrying up to 4 passengers and luggage)
Maximum load conditions and / or towing (Up to maximum allowable Gross Vehicle Weight)
Please ensure that all Workshop and Service personnel are aware of this change.
Workshop Manual Information will updated at the next amendment.
PARTS INFORMATION:
Not applicable
WARRANTY CLAIMS: Not applicable
Bulletin N o : 0009 L8512bu 1 03.03.99
Front 1.8 bar (26 psi) Rear 1.8 bar (26 psi)
Front 2.1 bar (30 psi) Rear 2.1 bar (30 psi)
Parts & tools for this job For Land Rover Freelander
- TOOLTyre pressure gaugeSearch: digital tyre pressure gauge
- TOOLTorque wrenchSearch: 1/2 inch torque wrench
- TOOLBreaker barSearch: breaker bar
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.