Freelander (LN) V6-2.5L (2004)
6. Remove 2 bolts securing rear edge of front bumper to inner front wing.
7. Remove 4 screws securing bumper to bonnet locking platform.
8. With assistance, carefully pull each side of bumper forward to release it from its mountings.
CAUTION: Always protect paintwork when removing or refitting any body trims or bumpers.
9. Remove front bumper.
NOTE: Do not carry out further dismantling if component is removed for access only.
10. Remove front number plate.
11. Remove clips securing badge to grille, remove badge and discard clips.