Freelander (LN) V6-2.5L (2004)
-
Airbag retaining clips
-
Internal trim finisher
-
Front seat belt buckle pre-tensioners
-
SRS DCU
-
Both side impact crash sensors
In addition the following should be inspected for damage and replaced as necessary:
-
Headlining
-
Mounting brackets
-
Front seat belts - retractors, webbing tongue latching 'D' loop and body anchorage points
-
Rear seat belt buckles - webbing, buckle covers, tongue latching and body anchorage points
-
Adjacent trim components
-
Seat belt height adjusters
Rear impacts
Rear impacts may cause the seat belt pre-tensioners to deploy. If this occurs all pre-tensioner units must be replaced. In addition the following
components should be inspected for damage and replaced as necessary:
-
Front seat frames and head restraints
-
Seat belt height adjusters
-
Front seat belts retractors webbing tongue latching, 'D' loop and body anchorage points
-
Rear seat belt buckles webbing buckle covers tongue latching and body anchorage points
-
SRS DCU
-
SRS side impact sensor.
Periodic replacement of SRS components
The performance of the propellants within airbags and pre-tensioners will deteriorate over a period of time.
As a result, it is essential that airbags, seat belt pre-tensioners and the rotary coupler are replaced every 15 years.