Freelander (LN) V6-2.5L (2004)
18. Remove protective covers and tape.
19. Test sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry before testing. Spray water around glass and check
for leaks. Mark any area that leaks. Dry glass and sealer then apply additional sealer.
20. Fit 'A' post upper trim casings.
21. Fit headlining retaining stud.
22. Fit sun visor retaining clips and sun visors.
23. Fit interior mirror.
24. Fit air intake panel.
CAUTION: A curing time of 6 hours is desirable, during this time leave a window open and do not slam the doors. If the car must be
used, drive slowly.