Range Rover V8 Engine Oil and Filter Change - Service Procedures
MAINTENANCE
10-14
PROCEDURES
19. Fill engine with recommended grade of oil to
LUBRICANTS AND SEALANTS,
Lubrication.
20. Start engine, run at idle until oil pressure light is
extinguished.
21. Stop engine, recheck oil level.
22. Check for signs of oil leakage.
Engine oil and filter - V8 engine
WARNING: Avoid excessive skin contact with
used engine oil. Used engine oil contains
potentially harmful contaminants which may
cause skin cancer or other serious skin
disorders.
Replace
1. Raise vehicle on ramp.
2. Position suitable container beneath sump.
3. Clean area around oil drain plug.
4. Remove oil drain plug and discard sealing
washer.
5. Allow oil to drain.
WARNING: Observe due care when draining
oil as oil can be very hot.
6. Lower vehicle.
7. Remove oil filter cap, remove and discard 'O'
ring.
8. Remove and discard filter element.
M01 0253
