L322 Range Rover Service Procedures
SEATS
76-5-26 REPAIRS
6. Release 2 studs securing lower half of
backboard.
7. Release squab side cover from both sides of
backboard.
8. Release backboard from seat.
9. Release headrest from motor assembly and
remove from seat.
10. Disconnect multiplug from headrest rise and fall
motor.
11. Release motor assembly from retaining clips
and remove from frame.
Refit
1. Position motor assembly to frame and secure in
retaining clips.
2. Connect multiplug to headrest rise and fall
motor.
3. Fit head rest in seat and secure to motor
assembly.
4. Position backboard to seat assembly, fit studs
securing lower of backboard.
5. Position and fit both sides of squab cover to
backboard.
6. Position lower squab cover to backboard and
staple.
7. Fit backboard tension straps to under seat
retaining clips.
8. Fit armrest to boss and secure with Allen bolt,
tighten to 25 Nm (18 lbf.ft).
9. Fit seat assembly.