landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Audio System - Loses Sound On Vehicle Start Up|Page 4684 > < Campaign Q029 - CLOSED/Repair Procedure Still Valid|Page 4679
Page 1
background image

Amplifier: Customer Interest
Audio System - Loses Sound On Vehicle Start Up

No.: LTB00096

Issue: 1

Date: November 29, 2007

SECTION: 415-00

Loss of Audio System Sound on Start-up - Repair Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

AUDIO SYSTEM LOSES SOUND ON ENGINE START-UP

Situation: 

The audio system may lose sound on engine start-up.

Action: 

In the event of a customer concern of the above, follow the Repair Procedure outlined below.

TOOLS:

CAUTION:

Land Rover IDS and the Midtronics PSC-550 Vehicle Power Supply are required. Land Rover IDS DVD 109 Patch File 6

Midtronics P5C550 Vehicle Power Supply

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

RECONFIGURE THE AUDIO AMPLIFIER MODULE

CAUTION:

Land Rover IDS DVD109 Patch File 6 and the Midtronics PSC-550 Vehicle Power Supply are required.

1.

Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle.

2.

Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.

Audio System - Loses Sound On Vehicle Start Up|Page 4684 > < Campaign Q029 - CLOSED/Repair Procedure Still Valid|Page 4679