LR2 (LF) L6-3.2L (2008)
Crossed wires as illustrated above show an example of how a twisted pair of wires may be represented on the circuits.
The arrows illustrated above show an example of the page break symbols, identifying that the circuit continues at the corresponding letter on the sheet
number indicated.
The cup and ball symbol represents the male and female halves of connector. Most connectors plug directly into a component but some are wired directly
to the component using a flylead as with C503 above.
Ground points
Ground points are identified with an eyelet symbol and a connector number, except where components are grounded through its fixings, when only the
eyelet is shown.
Colour Codes
Using Wiring Diagrams
Using This Publication
Health And Safety