LR2 (LF) L6-3.2L (2008)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover
Removal
NOTE: New bumper covers are supplied without the four holes for the park distance control sensors.
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove both rear wheels and tires.
3. Remove the rear lamp assemblies.
4.
5.
6.
7.
8. Release the rear lower edge of the rear fender splash shield.