landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Body - Front Door Interior Handle Cable Clip|Page 4970 > < Front Door Exterior Handle|Service and Repair|Page 4965
Page 1
background image

Front Door Interior Handle: Technical Service Bulletins
Body - Front Door Interior Handle Cable Clip

No.: LTB00255
Issue: 1
Date: 19 FEB 2010

SECTION: 501

Front Door Latch Interior Release Cable End Clip - Revised Part

Availability

AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:
A revised front door latch interior release cable end clip is now available. The revised cable end clip lessens the risk of repeat repair and will ensure the
repair is completed right the first time.

Action:
In the event it becomes necessary to replace a front door latch interior release cable end clip, refer to the Repair Procedure outlined below.

PARTS:

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

REPLACE DOOR LATCH CABLE END

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home > NAS > LF - LR2 > Service Information> Model Year > Workshop Manual

1. Refer to Workshop Manual (GTR) section 501-05, Interior Trim and Ornamentation, and remove the interior front door trim panel.

Body - Front Door Interior Handle Cable Clip|Page 4970 > < Front Door Exterior Handle|Service and Repair|Page 4965