LR2 (LF) L6-3.2L (2008)
Trunk / Liftgate Striker: Adjustments
Liftgate Striker Adjustment
1. Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.
2. Remove the spare wheel cover.
3. Remove the loadspace scuff plate.
4. Loosen the 2 liftgate striker bolts.
5. Close the liftgate and check for an equal gap and alignment to the adjacent panels.
6. Open the liftgate and tighten the liftgate striker bolts.
Torque: 25 Nm
7. Install the loadspace scuff plate.
8. Install the spare wheel cover.