LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1681001.png)
Cowl Moulding / Trim: Service and Repair
Secondary Bulkhead Center Panel - 3.2L
Service Repair No - 76.11.35
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the engine cover.
3. Remove the plenum chamber.
4. Release the secondary bulkhead center panel pad.
5. Torque: 10 Nm
6.
Installation
1. To install, reverse the removal procedure.
