LR2 (LF) L6-3.2L (2008)
Front Subframe: Service and Repair
Uni-Body, Subframe and Mounting System - Front Subframe
Removal and Installation
Special Tool(s)
General Equipment
Powertrain Jack
Removal
1. 1.
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Siphon the fluid from the power steering reservoir.
3. Remove the front road wheels and tires.
4. Remove the engine undershield.
5. Disconnect the LH catalyst monitor sensor electrical connector.
6. Disconnect the RH catalyst monitor sensor electrical connector.
7. Release the catalyst monitor sensor wiring harness.