LR2 (LF) L6-3.2L (2008)
8. NOTE: Do not disassemble further if the component is removed for access only.
Remove the speaker.
Installation
1. Install the speaker
2. Install the D-pillar trim panel.
3. Secure the rear quarter trim panel.
4. Install the loadspace securing ring and tighten the Torx screw.
Torque: 25 Nm
5. Install the loadspace stowage tray.
6. Attach the liftgate seal.
7. Install the loadspace scuff plate.
8. Install the spare wheel cover.
Rear Quarter Trim Panel
Rear Quarter Trim Panel
Service Repair No - 76.13.37
Removal
1.
2. Remove the loadspace scuff plate.