landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Front Door Module (FDM)|Page 5363 > < Module-Driver-Door|Page 5360

LR2 (LF) L6-3.2L (2008)

Page 1
background image

Door Module: Service and Repair
Front Door Module (FDM)

Front Door Module (FDM)

Removal

1. Disconnect the battery ground cable.
2. Remove the front door trim panel.

Installation

1. To install, reverse the removal procedure.
2. Connect the battery ground cable.
3. If a new component has been installed, configure using Land Rover approved diagnostic equipment.

Front Door Module (FDM)|Page 5363 > < Module-Driver-Door|Page 5360