LR2 (LF) L6-3.2L (2008)
^
Apply strips of masking tape to the front corners of the roof opening panel glass to prevent damage to the glass when lifting the panel.
^
Close the roof opening panel glass to 85 mm (3.3 in) to release the front of the glass. (Figure 5)
^
Switch ignition off.
^
Lift up on front of roof opening panel.
^
Slide the roof opening panel glass 230 mm (9.0 in) rearwards from the front body edge to the line of the roof rail joint. (Figure 6)
^
Raise the roof opening panel glass by 75 mm (3.0 in)
^
Support the panel in the raised position with a soft block. (Figure 7)