LR2 (LF) L6-3.2L (2008)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket
Brake Pedal and Bracket
Service Repair No - 70.35.01
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Make the SRS system safe.
2. Remove the driver lower air bag module.
3. Remove the throttle pedal assembly.
4.
5. Remove the brake pedal assembly.
Torque:
25 Nm
6. NOTE: Do not disassemble further if the component is removed for access only.
Remove the stoplamp switch.