LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1130001.png)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
Brake Fluid Reservoir
Removal
CAUTION: Extreme cleanliness must be exercised when handling these components.
CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
Left-hand drive vehicles
2. Remove the battery.
Right-hand drive vehicles
3. Remove the plenum chamber panel.
All vehicles
4. CAUTION: Be prepared to collect escaping fluids.
Torque:
6 Nm
Vehicles with manual transmission
5. CAUTION: Be prepared to collect escaping fluids.
CAUTION: Make sure that all openings are sealed.
All vehicles
6. CAUTION: Make sure that all openings are sealed.
