LR2 (LF) L6-3.2L (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor
Rear Wheel Speed Sensor
Service Repair No - 70.65.31
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the rear wheel and tire.
3.
4.
5.
Torque:
5 Nm
Installation
1. To install, reverse the removal procedure.
2. If a new component is to be installed, configure using Land Rover approved diagnostic equipment.