LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1853001.png)
Cruise Control Switch: Service and Repair
Speed Control Deactivator Switch
Speed Control Deactivator Switch
Removal
Right-hand drive vehicles
1. Remove the cover and disconnect the battery ground cable.
2. Remove the stoplamp switch.
All vehicles
CAUTION: The switch has a latching device that only allows the switch to be removed or installed when the switch plunger is depressed.
NOTE: RHD illustration shown, LHD is similar.
Installation
1. To install, reverse the removal procedure.
