LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-561003.png)
6. Release the quick connector joint securing the vent hose to the engine. (Figure 2)
7. Remove and discard the vent hose.
8. Install new vent hose to the engine.
9. Install new vent hose to the expansion tank.
10. Check coolant level:
^
Top up coolant level if necessary.
11. Refer to Workshop Manual (GTR) section 501-05 and install the engine cover.
12. Close the hood.
Disclaimer
