LR2 (LF) L6-3.2L (2008)
Thermostat: Service and Repair
Thermostat
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the intake manifold assembly.
3. Drain the cooling system.
4.
5. Torque:
10 Nm
6. Remove the thermostat.
7. Remove and discard the gasket.
8. NOTE: Do not disassemble further if the component is removed for access only.
Remove the ECT sensor.