LR2 (LF) L6-3.2L (2008)
Oil Pan: Service and Repair
Oil Pan
Service Repair No - 12.60.44
Removal
1. Remove the cover and disconnect the battery ground cable.
2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
3. Remove the starter motor.
4. WARNING: Be prepared to collect escaping oil.
CAUTION: Discard the seal.
Remove the lubricant drain plug.
5. Disconnect the oil level sensor electrical connector.
6. Release the coolant rail.
7. Remove the dipstick tube.