LR2 (LF) L6-3.2L (2008)
4. CAUTION: Make sure that the area around the component is clean and free of foreign material.
Align the timing cover.
Special Service Tools: Holder, Generator Pulley
5. Tighten the bolts in the sequence illustrated.
Torque:
M8. 25 Nm
M7. 16 Nm
6. Install the seal to the special tool.
Special Service Tools: Installer, Auxiliary Drive Seal
Remove the seal guide.
7. CAUTION: Make sure that the mating faces are clean and free of corrosion and foreign material.
Install the special tool and seal assembly into the accessory drive shaft.