LR2 (LF) L6-3.2L (2008)
Air Door Actuator / Motor: Service and Repair
Footwell Vent/Duct Blend Door Actuator - LHD
Footwell Vent/Duct Blend Door Actuator - LHD
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Make the SRS system safe.
2. Remove the steering column.
3. Remove the driver lower air bag module support bracket.
Torque: 7 Nm
Installation
1. To install, reverse the removal procedure.
2. If a new component has been installed, configure using Land Rover approved diagnostic equipment.