LR2 (LF) L6-3.2L (2008)
Installation
1. Install the A/C condenser, and tighten the bolt.
Torque: 10 Nm
CAUTION: Extreme cleanliness must be exercised when handling these components.
NOTE: Lubricate the O-ring seals with clean refrigerant oil.
2. Connect the A/C condenser refrigerant lines, tighten the bolts.
Torque: 10 Nm
3. Install the PAS cooler and tighten the bolts.
Torque: 10 Nm
4. Install the air deflector.
5. Install the front bumper.
6. Recharge the A/C system.
7. Connect the battery ground cable and install the cover.