LR2 (LF) L6-3.2L (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Tire Pressure Monitoring System Receiver
Service Repair No - 86.54.01
Removal
1. Remove both D-pillar upper trim panels.
2. Remove both C-pillar trim panels.
3. Remove both rear passenger assist handles.
4. Release the rear of the headliner.
5. Remove the tire pressure monitoring system receiver.
Installation
1. To install, reverse the removal procedure.
2. If a new component is to be installed, configure using IDS.