LR2 (LF) L6-3.2L (2008)
Tail Lamp: All Technical Service Bulletins
Lighting - Condensation/Misting Inside Rear Lamps
No.: LTB00261
Issue: 1
Date: 19 FEB 2010
SECTION: 417
Rear Lamp Condensation / Misting
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
Condensation or misting may be evident in the rear lamp assemblies. This may be caused by moisture inside the lamp lenses.
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to install vents in the rear lamp assemblies.
PARTS:
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
INSTALL VENTS TO REAR LAMP ASSEMBLIES
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > LF - LR2 > Service Information> Model Year > Workshop Manual
1. Refer to Workshop Manual (GTR) section 417-01, Exterior Lighting, and remove the left rear lamp assembly.