LR2 (LF) L6-3.2L (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor
Service Repair No - 18.30.24
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the engine cover.
CAUTION:
^
Note the fitted position of the special washer.
^
Discard the seal.
3. Torque: 10 Nm
Installation
CAUTION:
^
Make sure that the mating faces are clean and free of corrosion and foreign material.
^
A new O-ring seal is to be installed.
1. To install, reverse the removal procedure.