LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-879001.png)
Canister Purge Control Valve: Service and Repair
Evaporative Emission Canister Purge Valve
Removal
NOTE:
^
Take care not to disconnect the purge line from the rear of the intake manifold, when removing the purge valve.
^
Removal steps in this procedure may contain installation details.
WARNING: Make sure to support the vehicle with axle stands.
1. Raise and support the vehicle.
2. Remove the engine undershield.
