LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-949001.png)
Ignition Coil: Service and Repair
Ignition Coil-On-Plug
Removal
CAUTION: After switching of the ignition, wait for 2 minutes before disconnecting the battery. Failure to wait for 2 minutes will damage
the navigation computer.
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Disconnect the 6 ignition coil-on-plugs.
Installation
1. Install the ignition coil-on-plugs.
Torque: 10 Nm
2. Connect the ignition coil-on-plug electrical connections.
3. Install the engine cover.
4. Connect the battery ground cable.
