LR2 (LF) L6-3.2L (2008)
Steering Column Control Module: Service and Repair
Steering Column Lock Module
Service Repair No - 57.40.28
Removal
NOTE: The column lock module is retained with 2 X 6mm patch locked, tamper proof bolts.
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the cover and disconnect the battery ground cable.
2. Remove the steering column assembly.
3. CAUTION: Tighten the new tamper proof bolts until the hexagon shears.
Installation
1. To install, reverse the removal procedure.
2. Using the Land Rover approved diagnostic system, calibrate a new module.