LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1426001.png)
Air Bag Control Module: Service and Repair
Restraints Control Module (RCM)
Removal
NOTE: The RCM must be replaced after every time any SRS component has been deployed.
1. Make the SRS system safe.
2. Remove the floor console.
3. Cut the carpet for access.
Position the carpet aside for access.
4. Torque: 10 Nm
Installation
1. To install, reverse the removal procedure.
2. Using Land Rover approved diagnostic equipment, programme a new RCM.
