LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1472007.png)
25. Remove the rear seat backrest cover and pad assembly.
26. Remove the carpet from the LH rear seat backrest.
27. Remove the rear center safety belt retractor Torx bolt.
Release the locking tang.
Installation
1. Install the rear center safety belt retractor.
Locate the tang of the rear center safety belt into the LH rear seat backrest frame.
2. Install the rear center safety belt retractor Torx bolt.
Torque: 35 Nm
