LR2 (LF) L6-3.2L (2008)
Installation
1. Install the generator coupling.
Torque: 75 Nm
2. Install the locating dowels flush with the generator casing.
NOTE: Make sure that the installation marks are aligned.
3. Install the coupling.
4. Locate the generator and install and lightly tighten the upper bolts.
5. Using the special tool, install the dowels to align the generator.
6. Tighten the generator bolts.
Torque: 24 Nm
7. Connect the generator harness and tighten the nut.
Torque: 12 Nm
8. Install the intake manifold.
9. Connect the battery ground cable.