LR2 (LF) L6-3.2L (2008)
3. Disconnect the battery positive cable from the generator. (Figure 1)
4. Remove the positive battery cable.
5. Install the new positive battery cable: (Figure 2)
^
Route cable as indicated.
6. Connect the positive battery cable to the generator:
(Figure 1)
^
Tighten nut to l2Nm (8.85lbf ft).
7. Refer to Workshop Manual, section 303-01: Engine - 3.2L NA-16, and install the intake manifold.
8. Refer to Workshop Manual, section 307-01: Automatic Transmission/Transaxle, and install the transmission.