LR2 (LF) L6-3.2L (2008)
Front Steering Knuckle: Service and Repair
Front Suspension
Wheel Knuckle
Service Repair No - 60.25.01
Special Service Tools
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the plenum chamber panel.
2. Release the hood support struts and secure the hood in an upright position.
3. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
4. Remove the wheel and tire.
5. CAUTION: Discard the bolt.
Torque:
Stage 1. 45 Nm
Stage 2. 80 Degrees