LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1282008.png)
24. CAUTION: Mark the components to aid installation.
Remove the wheel knuckle bushing.
Special Service Tools: Hydraulic Cylinder 10t
Special Service Tools: Remover/Installer, Wheel Knuckle Bushing
Special Service Tools: Remover, Wheel Knuckle Bushing
Installation
1. CAUTION: Make sure that the installation marks are aligned.
2. CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.
Install the wheel knuckle bushing.
Special Service Tools: Hydraulic Cylinder 10t
Special Service Tools: Installer, Wheel Knuckle Bushing
Special Service Tools: Remover/Installer, Wheel Knuckle Bushing
3. Install the brake backing plate.
4. CAUTION: One side of the bearing is magnetic. The magnetic side is identifiable by the application of a matt black finish. The magnetic
side must face towards the inboard side of the vehicle. Before fitting the bearing, make sure the magnetic face is clean. The bearing must
be handled with extreme care.
Position the wheel knuckle assembly in a press and support on special tool.
Special Service Tools: Remover/Installer, Bushing
Press the new wheel bearing into the wheel knuckle assembly using special tool.
