LR2 (LF) L6-3.2L (2008)
Stabilizer Bushing: Service and Repair
Front Suspension
Front Stabilizer Bar Bushing
Service Repair No - 60.10.05
Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the front wheels and tires.
3. Remove the engine undershield.
4. CAUTION: Make sure that the ball joint ball does not rotate.
Disconnect both front stabilizer bar links from the stabilizer bar.
Discard the nuts.
5. WARNING: Make sure that new nuts are installed.
Remove the stabilizer bar bushing.
Installation
1. WARNING: Make sure that new nuts are installed.
Install the stabilizer bar bushings.
Torque:
175 Nm