LR2 (LF) L6-3.2L (2008)
REPAIR PROCEDURE
REPLACE REAR SPRING RUBBER ISOLATOR AND PLASTIC WEDGE
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home> NAS > Service Information> LF - LR2 > Workshop Manuals> Bookmark "Chassis/Suspension/204/02 Rear Suspension" Link
"Rear Shock Absorber"
1.
Refer to GTR Workshop Manual, Section: 204-02 (64.30.02) and remove the rear spring from the shock absorber and spring assembly.
2.
Discard the spring isolator and wedge.
CAUTION:
The new isolator and wedge must be oriented correctly with the notch and tang engaged. (Figure 1)