LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1325001.png)
Tire Pressure Monitor Antenna: Service and Repair
Tire Pressure Monitoring System Rear Antenna
Tire Pressure Monitoring System Rear Antenna
Service Repair No - 86.53.17
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Release the fender splash shield.
3. Remove the tire pressure antenna.
Installation
1. To install, reverse the removal procedure.
2. Initiate a new tire pressure antenna using WDS.