LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1020001.png)
Transmission Speed Sensor: Service and Repair
Input Shaft Speed (ISS) Sensor - 3.2L
Removal
CAUTION: Extreme cleanliness must be exercised when handling these components.
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the valve body.
3. CAUTION: Extreme cleanliness must be exercised when handling this component.
Torque:
6 Nm
Installation
1. To install, reverse the removal procedure.
