LR2 (LF) L6-3.2L (2008)
9. Install the LH halfshaft.
10. Connect the Active On-demand Coupling module electrical connector.
11. Install the driveshaft rear support bracket.
Torque:
35 Nm
12. CAUTION: Make sure that new bolts are installed.
Connect the driveshaft to the rear flange.
Torque:
40 Nm
13. Install the rear muffler.
14. Install the LH rear wheel and tire.
15. Check and top-up the active on-demand coupling fluid level.
16. Fill the differential case with fluid.