LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1054005.png)
7. NOTE: LH illustration shown, RH is similar.
8. Remove and discard the rear halfshaft nut.
9. NOTE: LH illustration shown, RH is similar.
Release the rear halfshaft.
Special Service Tools: Remover, Halfshaft
10. Position a container to collect the oil spillage.
11. Install the special tool, to the rear halfshaft inboard joint casing.
Special Service Tools: Remover, Halfshaft Inboard Joint
