LR2 (LF) L6-3.2L (2008)
Transfer Case Actuator: Technical Service Bulletins
Drivetrain - Rev. On-Demand Coupling Service Procedure
No.: LTB000161
Issue: 1
Date: 07 OCT 2008
SECTION: 205
New Workshop Procedure - Remove / Install the Active On-Demand Coupling Module
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The procedure to remove / install the Active On-Demand Coupling Module has been revised. It is no longer necessary to drain and refill the oil within
the unit.
Action:
In the event it becomes necessary to remove / install the Active On-Demand Coupling Module, refer to the Repair Procedure outlined below.
PARTS:
No parts necessary; information only
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY
REPAIR PROCEDURE:
REPLACE ACTIVE ON-DEMAND COUPLING MODULE
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > LF-LR2 > Service Information > Model Year >
Workshop Manual > 2: Chassis > 205-02 > Rear Drive Axle / Differential > Active On-Demand Coupling Module (51.30.03)
1.
Refer to Workshop Manual (GTR) Section 51.30.03 to remove / install the Active On-Demand Coupling Module.