LR2 (LF) L6-3.2L (2008)
Control Unit: Service and Repair
NOTE: This article contains updated information called out in TSB TECLTB00161.
Active On-Demand Coupling Module
Service Repair No - 51.30.03
Removal
NOTE: If replacing the Active on-demand coupling module the sensor and throttle valve must also be replaced.
WARNING: Make sure to support the vehicle with axle stands.
1. Raise the vehicle on a lift.
2. Disconnect the 2 electrical connectors.
CAUTION: Make sure that the area around the component is clean and free of foreign material.
3. Position a container to collect the fluid spillage.
Remove and discard the gasket.
4. Remove the throttle valve using grips or pliers.