LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-2038001.png)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the RH fender splash shield.
3. Drain the washer reservoir fluid.
4. NOTE: Do not disassemble further if the component is removed for access only.
Remove the windshield washer pump.
Installation
1. To install, reverse the removal procedure.
